In-Line PoE++ Surge Protector - 1G/10Gbps, 5-ports, 1U rack Panel, 802.3bt Type 4, Cat6/6A, Metal Case, IEC Compliant

In-Line PoE++ Surge Protector - 1G/10Gbps, 5-ports, 1U rack Panel, 802.3bt Type 4, Cat6/6A, Metal Case, IEC Compliant - Image 2

In-Line PoE++ Surge Protector – 1G/10Gbps, 5-ports, 1U rack Panel, 802.3bt Type 4, Cat6/6A, Metal Case, IEC Compliant

SKU R211-POE-105-10GBT-B1U Categories Network, Surge Protector Tags 10Gbps, 1Gbps, 1U, 5 ports, Cat6, Cat6A, IEC Compliant, PoE, rack panel, Surge Protector

Features:

Easy to connect between the Ethernet source and the device using standard Cat 6/6A cabling
Rapid reaction time under 1 ns helps prevent damage from lightning/power surges
Supports 802.3af/802.3at/802.3bt IEEE standards and data transmission speeds up to 1 Gbps
Plug-and-play operation with no software required for easy, immediate installation
Perform ESD, EFT, and lightning surge protection
IEC regulations:
- IEC 61000-4-2 (8k/15kV)
- IEC 61000-4-4 (EFT) 2kV(5KHz/100KHz)
- IEC 61000-4-5 (Lightning) ±6KV 1, 2/50 (8/20) s
90-degree RJ-45 I/O port interface
The 1U rack panel streamlines circuit protector placement for the entire system, typically located at the rear of a 19-inch rack for input and output lines
Safeguarde 5 Ethernet Connections
Support 802.3af Type 1/802.3at Type 2, and IEEE 802.3bt Type 4 90W
Support PD PoE and PSE PoE
Under 10G product operation, the maximum transmission distance achieved was 125 ft using Cat6A cable
Under 1G product operation, the maximum transmission distance achieved was 330 ft using Cat6 cable
Response time: <0.7ns
Working voltage: 60V
Max. continuous current: 1.5 Amps
Clamping voltage common: 75V
Dimension: 19 x 1.73 x 0.5 (inch)
1-year limited warranty

Description

Description

Use in your digital signage network to protect Power over Ethernet(PoE) equipment from lightning surges, ESD, and cable discharge.