4K/60Hz over IP fiber KVM extender supports audio/video signal transmission over a duplex single-mode LC fiber cable for distances up to 10 KM (32,800 ft). The transmitter/encoder is equipped with HDMI, DisplayPort, and USB Type-C input ports, which can be selected via IR switch.

This IP transmitter/encoder smoothly switches between HDMI, DisplayPort, and USB Type-C input signals. Users can effortlessly transition between these inputs using IR controls, ensuring a seamless experience. Additionally, it supports signal extension via the TCP/IP protocol over a single LC duplex single-mode fiber cable for up to 10 km (32,800 ft) at 4K/60Hz resolution (Applicable to 1G Fiber version only).

It also supports the transmission of audio, RS-232, IR, and USB 2.0 control signals, extending up to 10 km over a single LC duplex single-mode fiber cable. Furthermore, the transmission distance can be extended by cascading through a Gigabit Ethernet network switch (Level II) that supports IGMP and VLAN.

• Support 1 HDMI, 1 DisplayPort, and 1 USB Type-C Switch Inputs
• 4k/60Hz HDMI local output port at transmitter
• Input selection control via IR control pad
• Automatic detection of input signal selection
• LED indicators for active input and power
• Compression Algorithm: Visually lossless compression; Compression Ratio: x18 ~ x20
• Latency Time: 2ms (2160P)
• Video bitrate: ~ 800Mbps
• With HDMI Output for local monitoring display
• Unlimited distance through cascading 1G hub/switch, no more signal interference
• Dip switch to set up unit ID number
• Control interfaces over RS-232, IR
• High-performance USB 2.0 extension over IP, which supports Webcam
• Target applications True 4K UHD-over-IP Extender; USB-over-IP Extender Unicast A/V Extender; AV/KVM-over-IP
• Supports the following function
  1. video streams up to 4K@60Hz (YUV420/422/444) In/Out
  2. HDCP2.2/2.3
  3. HDR10, HDR10+, Dolby Vision
  4. Audio LPCM up to 12 channels
  5. Audio Line-OUT
  6. transmission up to 10km over a single LC duplex single-mode fiber cable
     * Slide switch to select unicast or broadcasting function
     1. Unicast – for one-to-one extension function
     2. Broadcasting – for one-to-many splitter function