4K/60Hz HDMI Audio Video over IP Receiver/Decoder with dual HDMI outputs

This Receiver/Decoder is HDMI over IP Receiver with dual HDMI outputs that allows the extension of HDMI signals using the TCP/IP protocol over UTP Cat6 Solid cable. This extender supports transmissions up to 4K/60Hz with Audio/RS232/IR/USB 2.0 control signal up to 100 meters on a single cable. The transmission distance can be further extended by cascading a Gigabit Ethernet network switch (Level II, supports IGMP and VLAN). This receiver also features bi-directional IR and RS232 pass-through. The extension also allows the receiver to operate in multicast mode, allowing the sending of a single AV signal to multiple receivers within the same local network.

Features:

• Compression Algorithm: Visually lossless compression; Compression Ratio: x18 ~ x20
• Latency Time: 2ms (2160P)
• Video bitrate: ~ 800Mbps
• Receiver with two 4K/60Hz HDMI outputs
• Unlimited distance through cascading 1G Ethernet hub/switch, No more signal interference
• Dip switch to set up unit ID number
• Control interfaces over RS-232, IR
• High-performance USB 2.0 extension over IP, which supports Webcam
• Target applications True 4K UHD-over-IP Extender; USB-over-IP Extender Unicast A/V Extender; AV/KVM-over-IP
• Supports the following function
  1. video streams up to 4K@60Hz (YUV420/422/444) In/Out
  2. Output Down-Scaling for 4k/60Hz content to 1080P/60Hz display on legacy display
  3. HDCP2.2/2.3
  4. HDR10, HDR10+, Dolby Vision
  5. Audio LPCM up to 12 channels
  6. Audio Lines-OUT & MIC IN
  7. transmission up to 100 meters over Cat6 UTP solid cable
• Slide switch to select unicast or broadcasting function
  1. Unicast – for one to one extension
  2. 2Broadcasting – for one to many splitter function