4K/60Hz HDMI Audio Video over IP 1G Fiber up to 10 km/32,808 ft LC Duplex Single-mode Fiber Cable Extender Receiver/Decoder with dual HDMI outputs

SKU R016-IP-FSB-RX102 Category Tags , , , , , ,

This extender kit is an HDMI over IP Receiver/decoder with dual HDMI outputs, allowing the extension of HDMI signals using the TCP/IP protocol over 1G Fiber up to 10 km (32,800 ft) of LC Duplex Single-Mode Fiber Cable. This extender supports transmissions up to 4K/60Hz with audio, RS-232 IR/USB 2.0 control signals, extending up to 100 meters on a single cable.

The transmission distance can be further extended by using a Gigabit Ethernet network switch (Level II, supports IGMP and VLAN). This Receiver also features bi-directional IR and RS232 pass-through. The extender kit also allows the Receiver to operate in multi-case mode, allowing the sending of a single AV signal to multiple receivers within the same local network.

  • Compression Algorithm: Visually lossless compression;Compression Ratio: x18 ~ x20
  • Latency Time: 2ms (2160P)
  • Video bitrate: ~ 800Mbps
  • Support Receiver two output 4K/60Hz HDMI
  • Supports HDMI video streams up to 4K@60Hz (YUV420/422/444) In/Out
  • Supports HDCP2.2/2.3
  • Supports HDR10, HDR10+, Dolby Vision
  • Supports Audio LPCM up to 12 channels
  • Supports Audio Lines IN/OUT & MIC IN
  • Supports 1G Fiber up to LC Duplex 10 km/32808 ft Single-Mode Fiber Cable
  • Supports Broadcasting
  • Unlimited distance through hub/switch, no more signal interference
  • Control interfaces over RS-232, IR
  • High-performance USB 2.0 extension over IP, which supports Webcam
  • Target applications 4K UHD-over-IP Extender; USB-over-IP Extender Unicast A/V Extender;AV/KVM-over-IP

Description

This extender kit is an HDMI over IP Receiver/decoder with dual HDMI outputs, allowing the extension of HDMI signals using the TCP/IP protocol over 1G Fiber up to 10 km (32,800 ft) of LC Duplex Single-Mode Fiber Cable. This extender supports transmissions up to 4K/60Hz with audio, RS-232 IR/USB 2.0 control signals, extending up to 100 meters on a single cable.

The transmission distance can be further extended by using a Gigabit Ethernet network switch (Level II, supports IGMP and VLAN). This Receiver also features bi-directional IR and RS232 pass-through. The extender kit also allows the Receiver to operate in multi-case mode, allowing the sending of a single AV signal to multiple receivers within the same local network.

Product Bulletin